hp elitebook 6930p cudan problem!

Dragan

Well-known member
Staff member
Joined
Jan 13, 2012
Messages
6,371
Reaction score
65
alt
djeembe:
e sada ovde ima jos jedna hp zackoljica-posle gasenja laptopa i ponovnog startovanja opec crna dobrodoslica i ponovo nemam hard,znaci moram prilikom svako startovanja na f9 u boot mod pa da izaberem da se bootuje sa uefi fajla pa tek onda mogu da izaberem sistem…cudni neki hp gnjavatori…nikad vise hp!
Ovo liči da uefi/bios nije podešen kako treba…
Ako ne može bios da se sredi, moglo bi da se prevaziđe tako što bi podizao sistem sa usb-a…refind iz live će pronaći svaki kernel, ukljujući i onaj sa instaliranog na hard disku.
Probaj sutra kada budeš narezao usb…
 
Last edited:

djeembe

Member
Joined
Nov 19, 2012
Messages
164
Reaction score
0
hocu!inace ja ne bih ni koristio ovaj uefi dodatak biosa da mogu da instaliram trios na normalan nacin sa obicnim biosom,skinuo sam malopre i manjaro-openRC i arch-openRC pa cu i njih probati da instaliram prvo sa normalnim podesavanjima biosa pa ako ni oni nece tako onda sa uefi…laku noc i hvala ti za tvoje vreme utroseno na mene!pozdrav!
 
Last edited:

Dragan

Well-known member
Staff member
Joined
Jan 13, 2012
Messages
6,371
Reaction score
65
alt
djeembe:
inace ja ne bih ni koristio ovaj uefi dodatak biosa da mogu da instaliram trios na normalan nacin sa obicnim biosom
Po meni, uefi ne bi uopšte trebalo izbegavati…usput, diskovi particionisani gpt tabelom imaju očiglednih prednosti nad dos particionom tabelom…bolja organizacija particija, izbegavanje logičkih itd.
Prema tome, nezavisno koji sistem želiš da instaliraš i koristiš, ne plaši se uefi-ja 🙂
 
Last edited:

djeembe

Member
Joined
Nov 19, 2012
Messages
164
Reaction score
0
Evo novih novina nazalost tuznih sto se TRIOS_a tice:
-fleska rezana “dd” komandom tri puta probana instalacija, manualno i automatska, u sva tri slucaja neuspesna, ne dize sistem posle instalacije-simptomi vec poznati…nece ni uz pomoc fleske posle sa @Dragan predlogom “.možeš da probaš da podigneš instaliran sistem kroz refind u live iso”!!
-Zatim probana instalacija manjara sa istom fleskom takodje “dd”-uspesno instaliran ali se sistem dize jedino uz f9 dugme-znace nece automatski …
Ono sto sam primetio kod rucnog particionisanja na TRIOS nemoze da se stavi flag na boot particiji dok kod automatske instalacije dobije “msfdata” flag…e sada razlika izmedji manjara i TRIOS je u tim flagovima manjaro koristi “boot i esp” flag i fat32 umesto fat16…jos jedna stvar kada ubacim flesku sa live sistemom odma pocne da se dize iz legacy boota ne iz uefija znaci i tu mora da radi f9–posto nemam vise ni jedan prazan disk da narezem novi TRIOS nisam u mogucnosti da vidim sta bi se tada desilo…

e da evo i loga kojeg sm zaboravio da stavim:

Code:
started linstaller - version 7.0.6
Selected configuration file: trios
Frontend: glade
Distro: TRIOS
Modules: uefidetect.inst welcome.front update.front language.front timezone.front userhost.front partdisks.front bootloader.front summary.front partdisks.inst unsquash.inst virtualpartitions.inst language.inst timezone.inst network.inst supportrepo.inst bootloader.inst userhost.inst debian.inst clean.inst fstab.inst finish.inst end.front
Services: glade

Starting service glade…

Loading module uefidetect.inst…
UEFI Detected.
Unloading module uefidetect.inst…

Loading module welcome.front…
Unloading module welcome.front…

Loading module update.front…
packages are: linstaller linstaller-modules-base linstaller-frontend-cli
Unloading module update.front…

Loading module language.front…
Selected language: en_US.UTF-8
Selected keyboard: [‘us’] (model pc105, variant None)
Unloading module language.front…

Loading module timezone.front…
Selected timezone Europe/Belgrade
Unloading module timezone.front…

Loading module userhost.front…
Unloading module userhost.front…

Loading module partdisks.front…

Loading module partdisks.front…
Committing changes in /dev/sda
Committing changes in /dev/sda-1
Committing changes in /dev/sda1
Error: Partition(s) 1 on /dev/sdb have been written, but we have been unable to inform the kernel of the change, probably because it/they are in use. As a result, the old partition(s) will remain in use. You should reboot now before making further changes.
mkfs.fat 3.0.27 (2014-11-12)
Committing changes in /dev/sda2
Error: Partition(s) 1 on /dev/sdb have been written, but we have been unable to inform the kernel of the change, probably because it/they are in use. As a result, the old partition(s) will remain in use. You should reboot now before making further changes.
mkswap: /dev/sda2: warning: wiping old swap signature.
Setting up swapspace version 1, size = 1997944 KiB
no label, UUID=c771509b-b05c-494c-8998-b24c258cf03c
Committing changes in /dev/sda3
Error: Partition(s) 1 on /dev/sdb have been written, but we have been unable to inform the kernel of the change, probably because it/they are in use. As a result, the old partition(s) will remain in use. You should reboot now before making further changes.
mke2fs 1.42.12 (29-Aug-2014)
Creating filesystem with 60539359 4k blocks and 15138816 inodes
Filesystem UUID: e6fcb673-7859-41f3-82da-4c281bd77206
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
4096000, 7962624, 11239424, 20480000, 23887872

Allocating group tables: 0/1848 done
Writing inode tables: 0/1848 done
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: 0/1848 done

Committing changes in /dev/sdb
Committing changes in /dev/sdb-1
Committing changes in /dev/sdb2
Unloading module partdisks.front…
Unloading module partdisks.front…

Loading module bootloader.front…
Unloading module bootloader.front…

Loading module summary.front…
Unable to print details for /dev/sda-1
Unable to print details for /dev/sdb2
Unable to print details for /dev/sdb-1
Unable to print details for /dev/sda
Unable to print details for /dev/sdb
Beginning installation.
Unloading module summary.front…

Loading module partdisks.inst…
Freeing up stuff of uefidetect.inst…
Freeing up stuff of welcome.front…
Freeing up stuff of update.front…
Freeing up stuff of language.front…
Freeing up stuff of timezone.front…
Freeing up stuff of userhost.front…
Freeing up stuff of partdisks.front…
Freeing up stuff of bootloader.front…
Freeing up stuff of summary.front…
Unloading module partdisks.inst…

Loading module unsquash.inst…
Calculating the number of the files to copy…
Beginning copying system
System copied successfully.
Mounting /proc, /dev and /sys
Unloading module unsquash.inst…

Loading module virtualpartitions.inst…
Unloading module virtualpartitions.inst…

Loading module language.inst…
Setting language and keyboard
Unloading module language.inst…

Loading module timezone.inst…
Setting timezone
Unloading module timezone.inst…

Loading module network.inst…
Configuring networking…
Unloading module network.inst…

Loading module supportrepo.inst…
Unloading module supportrepo.inst…

Loading module bootloader.inst…
Installing grub bootloader…
Testing internet connection…
No internet connection, installing bootloader from local cache.
Selecting previously unselected package efibootmgr.
(Reading database … 204487 files and directories currently installed.)
Preparing to unpack …/efibootmgr_0.11.0-3_amd64.deb …
Unpacking efibootmgr (0.11.0-3) …
Selecting previously unselected package grub-efi-amd64-bin.
Preparing to unpack …/grub-efi-amd64-bin_2.02-beta2.9-ZOL12-7aa9f6_amd64.deb …
Unpacking grub-efi-amd64-bin (2.02-beta2.9-ZOL12-7aa9f6) …
Selecting previously unselected package grub-efi-amd64.
dpkg: considering removing grub-pc in favour of grub-efi-amd64 …
dpkg: no, cannot proceed with removal of grub-pc (–auto-deconfigure will help):
trios-grub2-settings pre-depends on grub-pc | grub-efi
grub-pc is to be removed.
grub-efi is not installed.

dpkg: regarding …/grub-efi-amd64_2.02-beta2.9-ZOL12-7aa9f6_amd64.deb containing grub-efi-amd64:
grub-efi-amd64 conflicts with grub-pc
grub-pc (version 2.02-beta2.9-ZOL11-7aa9f6) is present and installed.

dpkg: error processing archive /var/cache/apt/archives/grub-efi-amd64_2.02-beta2.9-ZOL12-7aa9f6_amd64.deb (–install):
conflicting packages - not installing grub-efi-amd64
Selecting previously unselected package grub-efi.
Preparing to unpack …/grub-efi_2.02-beta2.9-ZOL12-7aa9f6_amd64.deb …
Unpacking grub-efi (2.02-beta2.9-ZOL12-7aa9f6) …
Selecting previously unselected package libefivar0:amd64.
Preparing to unpack …/libefivar0_0.15-3_amd64.deb …
Unpacking libefivar0:amd64 (0.15-3) …
dpkg: dependency problems prevent configuration of grub-efi-amd64-bin:
grub-efi-amd64-bin depends on grub-common (= 2.02-beta2.9-ZOL12-7aa9f6); however:
Version of grub-common on system is 2.02-beta2.9-ZOL11-7aa9f6.

dpkg: error processing package grub-efi-amd64-bin (–install):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of grub-efi:
grub-efi depends on grub-common (= 2.02-beta2.9-ZOL12-7aa9f6); however:
Version of grub-common on system is 2.02-beta2.9-ZOL11-7aa9f6.
grub-efi depends on grub-efi-amd64 (= 2.02-beta2.9-ZOL12-7aa9f6); however:
Package grub-efi-amd64 is not installed.

dpkg: error processing package grub-efi (–install):
dependency problems - leaving unconfigured
Setting up libefivar0:amd64 (0.15-3) …
Setting up efibootmgr (0.11.0-3) …
Processing triggers for man-db (2.7.0.2-5) …
Processing triggers for libc-bin (2.19-18+deb8u2) …
Errors were encountered while processing:
/var/cache/apt/archives/grub-efi-amd64_2.02-beta2.9-ZOL12-7aa9f6_amd64.deb
grub-efi-amd64-bin
grub-efi
Traceback (most recent call last):
File “/usr/share/linstaller/linstaller/core/main.py”, line 163, in handle_exception
function()
File “/usr/share/linstaller/linstaller/modules/bootloader/inst/glade/init.py”, line 39, in progress
self.parent.moduleclass._pkgs_installbootloader
File “/usr/share/linstaller/linstaller/modules/bootloader/inst/init.py”, line 74, in grub_pkgs_install
m.sexec("dpkg -i /var/cache/apt/archives/.deb")
File “/usr/share/linstaller/linstaller/core/main.py”, line 113, in sexec
raise CmdError(“An error occoured while executing %s” % command)
CmdError: 'An error occoured while executing dpkg -i /var/cache/apt/archives/.deb’

Unloading module bootloader.inst…

Loading module userhost.inst…
Creating user
Shadow passwords are now on.
update-alternatives: using /usr/share/libgksu/debian/gconf-defaults.libgksu-sudo to provide /usr/share/gconf/defaults/10_libgksu (libgksu-gconf-defaults) in manual mode
Setting username
Unloading module userhost.inst…

Loading module debian.inst…
Removing live-specific packages…
dpkg: dependency problems prevent configuration of grub-efi-amd64-bin:
grub-efi-amd64-bin depends on grub-common (= 2.02-beta2.9-ZOL12-7aa9f6); however:
Version of grub-common on system is 2.02-beta2.9-ZOL11-7aa9f6.

dpkg: error processing package grub-efi-amd64-bin (–configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of grub-efi:
grub-efi depends on grub-common (= 2.02-beta2.9-ZOL12-7aa9f6); however:
Version of grub-common on system is 2.02-beta2.9-ZOL11-7aa9f6.
grub-efi depends on grub-efi-amd64 (= 2.02-beta2.9-ZOL12-7aa9f6); however:
Package grub-efi-amd64 is not installed.

dpkg: error processing package grub-efi (–configure):
dependency problems - leaving unconfigured
Errors were encountered while processing:
grub-efi-amd64-bin
grub-efi
Traceback (most recent call last):
File “/usr/share/linstaller/linstaller/core/main.py”, line 163, in handle_exception
function()
File “/usr/share/linstaller/linstaller/modules/debian/inst/glade/init.py”, line 25, in progress
self.parent.moduleclass.install.configure()
File “/usr/share/linstaller/linstaller/modules/debian/inst/init.py”, line 25, in configure
m.sexec(“dpkg --configure -a”)
File “/usr/share/linstaller/linstaller/core/main.py”, line 113, in sexec
raise CmdError(“An error occoured while executing %s” % command)
CmdError: ‘An error occoured while executing dpkg --configure -a’

Unloading module debian.inst…

Loading module clean.inst…
Removing linstaller-related configuration files…
Unloading module clean.inst…

Loading module fstab.inst…
Configuring fstab…
Unloading module fstab.inst…

Loading module finish.inst…
Finishing up…
Updating the initramfs…
I: update-initramfs is disabled (live system is running on read-only media).
Unloading module finish.inst…

Loading module end.front…

koliko vidim /dev/sdb se opet provlaci kroz ovaj log(fleska)
 
Last edited:

Dragan

Well-known member
Staff member
Joined
Jan 13, 2012
Messages
6,371
Reaction score
65
alt
djeembe:
koliko vidim /dev/sdb se opet provlaci kroz ovaj log(fleska)
Opet ti fleš nije narezan kako treba…najsigurniji način je da ga prvo kompletno obrišeš, uključivo i particionu tabelu na njemu.
Što se tiče instalacije i boot postupka kroz refind u live…ako je tebi bios zbrljan do te mere da se nakon svakog isključivanja laptopa resetuje na legacy mod, pa moraš da ideš na f9 kod podizanja sistema, ja tu zaista ne mogu pomoći…
 
Last edited:

djeembe

Member
Joined
Nov 19, 2012
Messages
164
Reaction score
0
ja tako i formatiram flesku kako si opisao pre svake nove radnje(gparted) stvarno ne znam kako mogu da pogresim u pravljenju butabilne fleske kad se sve automatski raadi…sto se tice biosa znam da si nemocan zato ja i pljujem hp korporaciju,malopre seam ponovo instalirao sa cd_a onu stariju verziju triosa kao sinoc isti postupak (automatski),jedina novina u odnosu na sinoc je sto sada iz refinda mogu da dignem samo uefi a boot boot/vmlinuz logo debiana ne tj. kada to odaberem sada se samo zacrni ekran i to je to (ostavio sam ga tako 15-ak minuta i nista)…ja sada sve ovo pisem cisto da bi drugi ljudi koji imaju elitebook 6930p znali sta ih ocekuje! ja cu probati i bios da flesujem poslednjim biosom jedino sto je muka sto to mora iz wina da se radi na ovom ukletom laptopu-sto znaci da samo zbog toga moram da instaliram i win a sto se tice fleske nazalost nemam drugu da probam i to…
 
Last edited:

Dragan

Well-known member
Staff member
Joined
Jan 13, 2012
Messages
6,371
Reaction score
65
alt
djeembe:
ponovo instalirao sa cd_a onu stariju verziju triosa kao sinoc isti postupak (automatski),jedina novina u odnosu na sinoc je sto sada iz refinda mogu da dignem samo uefi a boot boot/vmlinuz logo debiana ne
Hm? čini se da onda ni ta instalacija ne valja, ako refind ne vidi kernel…da li imaš log te najnovije instalacije sa cd-a?
Na instaliranom triosu treba da se nalazi u /var/log/installation.log
 
Last edited:

djeembe

Member
Joined
Nov 19, 2012
Messages
164
Reaction score
0
evo loga:

Code:
started linstaller - version 7.0.6
Selected configuration file: trios
Frontend: glade
Distro: TRIOS
Modules: uefidetect.inst welcome.front update.front language.front timezone.front userhost.front partdisks.front bootloader.front summary.front partdisks.inst unsquash.inst virtualpartitions.inst language.inst timezone.inst network.inst supportrepo.inst bootloader.inst userhost.inst debian.inst clean.inst fstab.inst finish.inst end.front
Services: glade

Starting service glade…

Loading module uefidetect.inst…
UEFI Detected.
Unloading module uefidetect.inst…

Loading module welcome.front…
Unloading module welcome.front…

Loading module update.front…
packages are: linstaller linstaller-modules-base linstaller-frontend-cli
Unloading module update.front…

Loading module language.front…
Selected language: en_US.UTF-8
Selected keyboard: [‘us’] (model pc105, variant None)
Unloading module language.front…

Loading module timezone.front…
Selected timezone Europe/Belgrade
Unloading module timezone.front…

Loading module userhost.front…
Unloading module userhost.front…

Loading module partdisks.front…
Committing changes in /dev/sda
Committing changes in /dev/sda-1
Committing changes in /dev/sda1
Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only.
Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only.
Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only.
mkfs.fat 3.0.27 (2014-11-12)
Committing changes in /dev/sda2
Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only.
Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only.
Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only.
Setting up swapspace version 1, size = 1997944 KiB
no label, UUID=584ab383-e82a-49d8-ad19-9479ee203245
Committing changes in /dev/sda3
Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only.
Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only.
Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only.
mke2fs 1.42.12 (29-Aug-2014)
Creating filesystem with 60539359 4k blocks and 15138816 inodes
Filesystem UUID: 14ba3345-7fce-487d-a6f6-b9a38e751ed0
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
4096000, 7962624, 11239424, 20480000, 23887872

Allocating group tables: 0/1848 done
Writing inode tables: 0/1848 done
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: 0/1848 done

Unloading module partdisks.front…

Loading module bootloader.front…
Unloading module bootloader.front…

Loading module summary.front…
Unable to print details for /dev/sda-1
Unable to print details for /dev/sda
Beginning installation.
Unloading module summary.front…

Loading module partdisks.inst…
Freeing up stuff of uefidetect.inst…
Freeing up stuff of welcome.front…
Freeing up stuff of update.front…
Freeing up stuff of language.front…
Freeing up stuff of timezone.front…
Freeing up stuff of userhost.front…
Freeing up stuff of partdisks.front…
Freeing up stuff of bootloader.front…
Freeing up stuff of summary.front…
Unloading module partdisks.inst…

Loading module unsquash.inst…
Calculating the number of the files to copy…
Beginning copying system
System copied successfully.
Mounting /proc, /dev and /sys
Unloading module unsquash.inst…

Loading module virtualpartitions.inst…
Unloading module virtualpartitions.inst…

Loading module language.inst…
Setting language and keyboard
Unloading module language.inst…

Loading module timezone.inst…
Setting timezone
Unloading module timezone.inst…

Loading module network.inst…
Configuring networking…
Unloading module network.inst…

Loading module supportrepo.inst…
Unloading module supportrepo.inst…

Loading module bootloader.inst…
Installing grub bootloader…
Testing internet connection…
No internet connection, installing bootloader from local cache.
Selecting previously unselected package efibootmgr.
(Reading database … 153577 files and directories currently installed.)
Preparing to unpack …/efibootmgr_0.11.0-3_amd64.deb …
Unpacking efibootmgr (0.11.0-3) …
Selecting previously unselected package grub-common.
Preparing to unpack …/grub-common_2.02-beta2.9-ZOL12-7aa9f6_amd64.deb …
Unpacking grub-common (2.02-beta2.9-ZOL12-7aa9f6) …
Selecting previously unselected package grub-efi-amd64-bin.
Preparing to unpack …/grub-efi-amd64-bin_2.02-beta2.9-ZOL12-7aa9f6_amd64.deb …
Unpacking grub-efi-amd64-bin (2.02-beta2.9-ZOL12-7aa9f6) …
Selecting previously unselected package grub-efi-amd64.
Preparing to unpack …/grub-efi-amd64_2.02-beta2.9-ZOL12-7aa9f6_amd64.deb …
Unpacking grub-efi-amd64 (2.02-beta2.9-ZOL12-7aa9f6) …
Selecting previously unselected package grub-efi.
Preparing to unpack …/grub-efi_2.02-beta2.9-ZOL12-7aa9f6_amd64.deb …
Unpacking grub-efi (2.02-beta2.9-ZOL12-7aa9f6) …
Selecting previously unselected package grub2-common.
Preparing to unpack …/grub2-common_2.02-beta2.9-ZOL12-7aa9f6_amd64.deb …
Unpacking grub2-common (2.02-beta2.9-ZOL12-7aa9f6) …
Selecting previously unselected package libefivar0:amd64.
Preparing to unpack …/libefivar0_0.15-3_amd64.deb …
Unpacking libefivar0:amd64 (0.15-3) …
Selecting previously unselected package os-prober.
Preparing to unpack …/os-prober_1.65_amd64.deb …
Unpacking os-prober (1.65) …
Setting up grub-common (2.02-beta2.9-ZOL12-7aa9f6) …
Setting up grub2-common (2.02-beta2.9-ZOL12-7aa9f6) …
Setting up libefivar0:amd64 (0.15-3) …
Setting up os-prober (1.65) …
Setting up efibootmgr (0.11.0-3) …
Setting up grub-efi-amd64-bin (2.02-beta2.9-ZOL12-7aa9f6) …
Setting up grub-efi-amd64 (2.02-beta2.9-ZOL12-7aa9f6) …

Creating config file /etc/default/grub with new version
Setting up grub-efi (2.02-beta2.9-ZOL12-7aa9f6) …
Processing triggers for man-db (2.7.0.2-5) …
Processing triggers for install-info (5.2.0.dfsg.1-6) …
Processing triggers for libc-bin (2.19-18+deb8u1) …
Selected location: False
Installing for x86_64-efi platform.
Installation finished. No error reported.
mount: unknown filesystem type ‘swap’
Generating grub configuration file …
Found background image: /usr/share/images/desktop-base/desktop-grub.png
Found linux image: /boot/vmlinuz-3.16.0-4-amd64
Found initrd image: /boot/initrd.img-3.16.0-4-amd64
Found memtest86+ image: /boot/memtest86+.bin
Found memtest86+ multiboot image: /boot/memtest86+_multiboot.bin
File descriptor 11 (/) leaked on lvs invocation. Parent PID 7481: /bin/sh
File descriptor 12 (/tmp/keeptalking.log) leaked on lvs invocation. Parent PID 7481: /bin/sh
File descriptor 16 (/dev/urandom) leaked on lvs invocation. Parent PID 7481: /bin/sh
No volume groups found
done
Installing refind…

WARNING: apt does not have a stable CLI interface yet. Use with caution in scripts.

Err http://http.debian.net jessie InRelease

Err http://mirror.org.rs mia InRelease

Err http://http.debian.net jessie-updates InRelease

Err http://http.debian.net jessie-backports InRelease

Err http://mirror.org.rs mia Release.gpg
Could not resolve ‘mirror.org.rs’
Err http://http.debian.net jessie Release.gpg
Could not resolve ‘http.debian.net’
Err http://archive.zfsonlinux.org jessie InRelease

Err http://archive.zfsonlinux.org jessie Release.gpg
Could not resolve ‘archive.zfsonlinux.org’
Err http://http.debian.net jessie-updates Release.gpg
Could not resolve ‘http.debian.net’
Err http://http.debian.net jessie-backports Release.gpg
Could not resolve ‘http.debian.net’
Err http://security.debian.org jessie/updates InRelease

Err http://security.debian.org jessie/updates Release.gpg
Could not resolve ‘security.debian.org’
Reading package lists…
Building dependency tree…
Reading state information…
53 packages can be upgraded. Run ‘apt list --upgradable’ to see them.
W: Failed to fetch http://http.debian.net/debian/dists/jessie/InRelease

W: Failed to fetch http://security.debian.org/dists/jessie/updates/InRelease

W: Failed to fetch http://http.debian.net/debian/dists/jessie-updates/InRelease

W: Failed to fetch http://http.debian.net/debian/dists/jessie-backports/InRelease

W: Failed to fetch http://mirror.org.rs/trios/dists/mia/InRelease

W: Failed to fetch http://archive.zfsonlinux.org/debian/dists/jessie/InRelease

W: Failed to fetch http://http.debian.net/debian/dists/jessie/Release.gpg Could not resolve ‘http.debian.net’

W: Failed to fetch http://mirror.org.rs/trios/dists/mia/Release.gpg Could not resolve ‘mirror.org.rs’

W: Failed to fetch http://http.debian.net/debian/dists/jessie-updates/Release.gpg Could not resolve ‘http.debian.net’

W: Failed to fetch http://http.debian.net/debian/dists/jessie-backports/Release.gpg Could not resolve ‘http.debian.net’

W: Failed to fetch http://archive.zfsonlinux.org/debian/dists/jessie/Release.gpg Could not resolve ‘archive.zfsonlinux.org’

W: Failed to fetch http://security.debian.org/dists/jessie/updates/Release.gpg Could not resolve ‘security.debian.org’

W: Some index files failed to download. They have been ignored, or old ones used instead.

WARNING: apt does not have a stable CLI interface yet. Use with caution in scripts.

Reading package lists…
Building dependency tree…
Reading state information…
efibootmgr is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 66 not upgraded.
** Warning ** : Boot0005 has same label rEFInd
BootCurrent: 0000
Timeout: 0 seconds
BootOrder: 0006,0004,0000,0001
Boot0000* Notebook Hard Drive
Boot0001* Notebook Upgrade Bay
Boot0002* USB Hard Drive
Boot0003* Notebook Upgrade Bay
Boot0004* trios
Boot0005* rEFInd
Boot0006* rEFInd
Unloading module bootloader.inst…

Loading module userhost.inst…
Creating user
Shadow passwords are now on.
update-alternatives: using /usr/share/libgksu/debian/gconf-defaults.libgksu-sudo to provide /usr/share/gconf/defaults/10_libgksu (libgksu-gconf-defaults) in manual mode
Setting username
Unloading module userhost.inst…

Loading module debian.inst…
Removing live-specific packages…
Removing live-boot live-boot-doc live-boot-initramfs-tools live-tools rsync uuid-runtime linstaller linstaller-frontend-cli linstaller-frontend-glade linstaller-modules-base linstaller-config-trios linstaller-session live-config-linstaller live-config live-config-doc live-config-sysvinit bricks quodlibet quodlibet-plugins exim4-base exim4-config nautilus gnome-sushi
Reading package lists…
Building dependency tree…
Reading state information…
Package ‘gnome-sushi’ is not installed, so not removed
Package ‘nautilus’ is not installed, so not removed
Package ‘quodlibet’ is not installed, so not removed
The following packages were automatically installed and are no longer required:
dmeventd fatresize hfsprogs imvirt imvirt-helper libdevmapper-event1.02.1
libemail-date-format-perl libfile-slurp-perl libfile-which-perl
libimvirt-perl liblvm2cmd2.02 libmime-lite-perl libmime-types-perl
libmodule-find-perl libreadline5 lvm2 python-progressbar squashfs-tools
user-setup
Use ‘apt-get autoremove’ to remove them.
The following packages will be REMOVED:
bricks* bsd-mailx* exim4* exim4-base* exim4-config* exim4-daemon-light*
linstaller* linstaller-config-trios* linstaller-frontend-cli*
linstaller-frontend-glade* linstaller-modules-base* linstaller-session*
live-boot* live-boot-doc* live-boot-initramfs-tools* live-config*
live-config-doc* live-config-linstaller* live-config-sysvinit* live-tools*
rsync* uuid-runtime*
0 upgraded, 0 newly installed, 22 to remove and 58 not upgraded.
After this operation, 10.1 MB disk space will be freed.
E: Can not write log (Is /dev/pts mounted?) - posix_openpt (2: No such file or directory)
(Reading database … 154006 files and directories currently installed.)
Removing linstaller-config-trios (7.0.6~mia2) …
Purging configuration files for linstaller-config-trios (7.0.6~mia2) …
dpkg: warning: while removing linstaller-config-trios, directory ‘/etc/linstaller’ not empty so not removed
Removing linstaller (7.0.6~mia2) …
Removing linstaller-modules-base (7.0.6~mia2) …
Removing bricks (4.0.0-1) …
Purging configuration files for bricks (4.0.0-1) …
Removing bsd-mailx (8.1.2-0.20141216cvs-2) …
Purging configuration files for bsd-mailx (8.1.2-0.20141216cvs-2) …
Removing exim4 (4.84-8) …
Purging configuration files for exim4 (4.84-8) …
Removing exim4-daemon-light (4.84-8) …
Stopping MTA:.
Purging configuration files for exim4-daemon-light (4.84-8) …
Removing exim4-base (4.84-8) …
Purging configuration files for exim4-base (4.84-8) …
Removing exim4-config (4.84-8) …
Purging configuration files for exim4-config (4.84-8) …
dpkg-statoverride: warning: no override present
Removing linstaller-frontend-cli (7.0.6~mia2) …
Removing linstaller-frontend-glade (7.0.6~mia2) …
Removing linstaller-session (7.0.6~mia2) …
Removing live-boot (4.0.2-1) …
Purging configuration files for live-boot (4.0.2-1) …
Removing live-boot-doc (4.0.2-1) …
Removing live-boot-initramfs-tools (4.0.2-1) …
I: update-initramfs is disabled (live system is running on read-only media).
Purging configuration files for live-boot-initramfs-tools (4.0.2-1) …
Removing live-config-linstaller (7.0.6~mia2) …
Purging configuration files for live-config-linstaller (7.0.6~mia2) …
dpkg: warning: while removing live-config-linstaller, directory ‘/etc/live’ not empty so not removed
Removing live-config (4.0.4-1) …
Purging configuration files for live-config (4.0.4-1) …
Removing live-config-doc (4.0.4-1) …
Removing live-config-sysvinit (4.0.4-1) …
Purging configuration files for live-config-sysvinit (4.0.4-1) …
Removing live-tools (4.0.2-1.1) …
Purging configuration files for live-tools (4.0.2-1.1) …
Removing rsync (3.1.1-3) …
Stopping rsync daemon: rsync.
Purging configuration files for rsync (3.1.1-3) …
Removing uuid-runtime (2.25.2-6.0nosystemd1) …
Stopping uuidd generator: uuidd.
Purging configuration files for uuid-runtime (2.25.2-6.0nosystemd1) …
Processing triggers for menu (2.1.47) …
Processing triggers for man-db (2.7.0.2-5) …
Processing triggers for desktop-file-utils (0.22-1) …
Processing triggers for mime-support (3.58) …
lvm2 set to manually installed.
Reading package lists…
Building dependency tree…
Reading state information…
The following packages will be REMOVED:
fatresize hfsprogs imvirt imvirt-helper libemail-date-format-perl
libfile-slurp-perl libfile-which-perl libimvirt-perl libmime-lite-perl
libmime-types-perl libmodule-find-perl python-progressbar squashfs-tools
user-setup
0 upgraded, 0 newly installed, 14 to remove and 58 not upgraded.
After this operation, 2,064 kB disk space will be freed.
E: Can not write log (Is /dev/pts mounted?) - posix_openpt (2: No such file or directory)
(Reading database … 153271 files and directories currently installed.)
Removing fatresize (1.0.2-7+b1) …
Removing hfsprogs (332.25-11) …
Removing imvirt (0.9.6-1) …
Removing libimvirt-perl (0.9.6-1) …
Removing imvirt-helper (0.9.6-1) …
Removing libmime-lite-perl (3.030-2) …
Removing libemail-date-format-perl (1.005-1) …
Removing libfile-slurp-perl (9999.19-4) …
Removing libfile-which-perl (1.09-1) …
Removing libmime-types-perl (2.09-3) …
Removing libmodule-find-perl (0.12-1) …
Removing python-progressbar (2.3-1) …
Removing squashfs-tools (1:4.2+20130409-2) …
Removing user-setup (1.61) …
Processing triggers for man-db (2.7.0.2-5) …
Processing triggers for python-support (1.0.15) …
Unloading module debian.inst…

Loading module clean.inst…
Removing linstaller-related configuration files…
Unloading module clean.inst…

Loading module fstab.inst…
Configuring fstab…
Unloading module fstab.inst…

Loading module finish.inst…
Finishing up…
Updating the initramfs…
update-initramfs: Generating /boot/initrd.img-3.16.0-4-amd64
Unloading module finish.inst…

Loading module end.front…
 
Last edited:

Dragan

Well-known member
Staff member
Joined
Jan 13, 2012
Messages
6,371
Reaction score
65
@djeembe
Tnx za log 🆙
Imaš dupli unos refind u uefi boot sekvenci…verovatno zaostalo u nvram netbook-a od prethodne instalacije.
Kada podigneš instaliran trios, daj molim te ispis iz terminala (kao root), da vidim kakvo je trenutno stanje:
efibootmgr
 
Last edited:

djeembe

Member
Joined
Nov 19, 2012
Messages
164
Reaction score
0
evo ga:

BootCurrent: 0006 Timeout: 0 seconds BootOrder: 0006,0004,0000,0001 Boot0000* Notebook Hard Drive Boot0001* Notebook Upgrade Bay Boot0002* USB Hard Drive Boot0003* Notebook Upgrade Bay Boot0004* trios Boot0005* rEFInd Boot0006* rEFInd

Ubacio sam novu vazecu source listu i posle upgrade_a je postalo moguce da se se bootuje sa obe opcije…kako da naredim wicd_u da mi ne iskljucuje wifi-kada palim sistem wifi mi je iskljucen stalno moram da ga ukljucujem?
 
Last edited:

Dragan

Well-known member
Staff member
Joined
Jan 13, 2012
Messages
6,371
Reaction score
65
@djeembe
Wicd je malkice problematičan za početnika za wifi podešavanja, i dodatno kada budeš hteo ostala okruženja/programe trebaće ti gnome.
wicd je ubačen u trios praktično privremeno, dok nije očišćen gnome od systemd.
Za taj notebook bolja opcija je da instaliraš network managerapt install network-manager-gnome
nakon toga restartuj računar, proveri da li radi NM, i posle toga obriši wicd, više ti neće trebati (mada mogu i paralelno da rade oba u triosu, ali je malo bezveze…)
 
Last edited:
Top