Problem sa skenerom

[goranvladov]

Imam dva racunara pod Linux Mint 13. Do nedavno jedan je bio pod Arch Linuxom. Na tom racunaru koji je bio pod Arch-om mi nije radio USB skener Canon CanoScan N1240U/LiDE 30 a na drugom pod Mint-om je radio out of the box. Posle 10-ak dana citanja wiki stranica i uzaludnih pokusaja sam resio da instaliram Mint i na drugi racunar nadajuci se da ce problem biti resen. Posto ni to nije resilo moj problem obracam vam se sa molbom da mi pomognete.

U ispisu lsusb komande jasno se vidi skener:

Bus 003 Device 003: ID 04a9:220e Canon, Inc. CanoScan N1240U/LiDE 30

sane-find-scanner:

found USB scanner (vendor=0x04a9 [Canon], product=0x220e [CanoScan], chip=LM9832/3) at libusb:003:003

dmesg | tail:

[ 3023.280029] usb 3-2: new full-speed USB device number 4 using uhci_hcd

lspci -v:

00:00.0 Host bridge: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface (rev 02)
Subsystem: ASRock Incorporation Device 2570
Flags: bus master, fast devsel, latency 0
Memory at f8000000 (32-bit, prefetchable) [size=64M]
Capabilities:
Kernel driver in use: agpgart-intel

00:01.0 PCI bridge: Intel Corporation 82865G/PE/P AGP Bridge (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, fast devsel, latency 32
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
Memory behind bridge: fc900000-fe9fffff
Prefetchable memory behind bridge: e7f00000-f7efffff
Kernel modules: shpchp

00:06.0 System peripheral: Intel Corporation 82865G/PE/P Processor to I/O Memory Interface (rev 02)
Flags: fast devsel
Memory at fecf0000 (32-bit, non-prefetchable) [size=4K]

00:1d.0 USB controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])
Subsystem: ASRock Incorporation Device 24d0
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at e000
Kernel driver in use: uhci_hcd

00:1d.1 USB controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI])
Subsystem: ASRock Incorporation Device 24d0
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at e400
Kernel driver in use: uhci_hcd

00:1d.2 USB controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI])
Subsystem: ASRock Incorporation Device 24d0
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at e800
Kernel driver in use: uhci_hcd

00:1d.3 USB controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 (rev 02) (prog-if 00 [UHCI])
Subsystem: ASRock Incorporation Device 24d0
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at ec00
Kernel driver in use: uhci_hcd

00:1d.7 USB controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02) (prog-if 20 [EHCI])
Subsystem: ASRock Incorporation Device 24d0
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at febffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities:
Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fea00000-feafffff
Kernel modules: shpchp

00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge (rev 02)
Flags: bus master, medium devsel, latency 0
Kernel modules: iTCO_wdt, intel-rng

00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: ASRock Incorporation Device 24d0
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at 01f0
I/O ports at 03f4
I/O ports at 0170
I/O ports at 0374
I/O ports at fc00
Memory at 50000000 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: ata_piix

00:1f.2 IDE interface: Intel Corporation 82801EB (ICH5) SATA Controller (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: ASRock Incorporation Device 24d1
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 18
I/O ports at d400
I/O ports at d000
I/O ports at cc00
I/O ports at c800
I/O ports at c400
Kernel driver in use: ata_piix

00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02)
Subsystem: ASRock Incorporation Device 24d0
Flags: medium devsel, IRQ 11
I/O ports at 0400
Kernel modules: i2c-i801

00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC’97 Audio Controller (rev 02)
Subsystem: ASRock Incorporation Device 0850
Flags: bus master, medium devsel, latency 0, IRQ 17
I/O ports at d800
I/O ports at dc00
Memory at febff800 (32-bit, non-prefetchable)
Memory at febff400 (32-bit, non-prefetchable)
Capabilities:
Kernel driver in use: snd_intel8x0
Kernel modules: snd-intel8x0

01:00.0 VGA compatible controller: NVIDIA Corporation NV18 [GeForce4 MX 4000] (rev a4) (prog-if 00 [VGA controller])
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 16
Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Memory at e8000000 (32-bit, prefetchable) [size=128M]
Expansion ROM at fe9e0000 [disabled] [size=128K]
Capabilities:
Kernel driver in use: nouveau
Kernel modules: nouveau, nvidiafb

02:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Subsystem: ASRock Incorporation Device 8139
Flags: bus master, medium devsel, latency 32, IRQ 22
I/O ports at b800
Memory at feaffc00 (32-bit, non-prefetchable)
Capabilities:
Kernel driver in use: 8139too
Kernel modules: 8139too, 8139cp

U medjuvremenu sam instalirao sane-backends i sve je isto.

Na komandu scanimage -L sve se zaledi i mora reset.

Ako imate neku ideju…