Na win 7 za očitavanje temperature komponenti koristim HWINFO64 i on svoj posao radi dobro.Zanima me da li i za Linux ima takav program?
Pokušao sam da preko terminala instaliram lm sensors i na komandu:
sudo apt-get install lm-sensors
dobijem ovo:
Čitam spiskove paketa… Izvršeno
Gradim stablo zavisnosti
Čitam informacije o stanju… Izvršeno
lm-sensors je već u najnovijoj verziji.
Instalirani paketi su automatski instalirani i nisu više potrebni:
gir1.2-json-1.0 gir1.2-timezonemap-1.0 gir1.2-xkl-1.0
Da biste ih uklonili izvršite „apt-get autoremove“.
0 ažuriranih, 0 novoinstaliranih, 0 za uklanjanje i 1 koji neće biti ažurirani.
Komanda:
sudo sensors-detect
Ovo:
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you’re doing.
Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no):
Module cpuid loaded successfully.
Silicon Integrated Systems SIS5595… No
VIA VT82C686 Integrated Sensors… No
VIA VT8231 Integrated Sensors… No
AMD K8 thermal sensors… No
AMD Family 10h thermal sensors… No
AMD Family 11h thermal sensors… No
AMD Family 12h and 14h thermal sensors… No
AMD Family 15h thermal sensors… No
AMD Family 15h power sensors… No
Intel digital thermal sensor… Success!
(driver `coretemp’)
Intel AMB FB-DIMM thermal sensor… No
VIA C7 thermal sensor… No
VIA Nano thermal sensor… No
Some Super I/O chips contain embedded sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no):
Probing for Super-I/O at 0x2e/0x2f
Trying family
Trying family
Found
Probing for Super-I/O at 0x4e/0x4f
Trying family
Trying family
Some systems (mainly servers) implement IPMI, a set of common interfaces
through which system health data may be retrieved, amongst other things.
We first try to get the information from SMBIOS. If we don’t find it
there, we have to read from arbitrary I/O ports to probe for such
interfaces. This is normally safe. Do you want to scan for IPMI
interfaces? (YES/no):
Probing for
Some hardware monitoring chips are accessible through the ISA I/O ports.
We have to write to arbitrary I/O ports to probe them. This is usually
safe though. Yes, you do have ISA I/O ports even if you do not have any
ISA slots! Do you want to scan the ISA I/O ports? (yes/NO):
Lastly, we can probe the I2C/SMBus adapters for connected hardware
monitoring devices. This is the most risky part, and while it works
reasonably well on most systems, it has been reported to cause trouble
on some systems.
Do you want to probe the I2C/SMBus adapters now? (YES/no):
Using driver `i2c-i801’ for device 0000:00:1f.3: Intel 82801G ICH7
Module i2c-i801 loaded successfully.
Module i2c-dev loaded successfully.
Next adapter: SMBus I801 adapter at 0500 (i2c-0)
Do you want to scan it? (yes/NO/selectively):
Now follows a summary of the probes I have just done.
Just press ENTER to continue:
Driver `it87’:
#----cut here----
it87
#----cut here----
If you have some drivers built into your kernel, the list above will
contain too many modules. Skip the appropriate ones!
Do you want to add these lines automatically to /etc/modules? (yes/NO)
Unloading i2c-dev… OK
Unloading i2c-i801… OK
Unloading cpuid… OK
KOMANDA:
sensors
OVO:
No sensors found!
Make sure you loaded all the kernel drivers you need.
Try sensors-detect to find out which these are.
Zanima me vaše mišljenje gdje sam i ako sam pogriješio ili šta još treba uraditi
Hvala
Pokušao sam da preko terminala instaliram lm sensors i na komandu:
sudo apt-get install lm-sensors
dobijem ovo:
Čitam spiskove paketa… Izvršeno
Gradim stablo zavisnosti
Čitam informacije o stanju… Izvršeno
lm-sensors je već u najnovijoj verziji.
Instalirani paketi su automatski instalirani i nisu više potrebni:
gir1.2-json-1.0 gir1.2-timezonemap-1.0 gir1.2-xkl-1.0
Da biste ih uklonili izvršite „apt-get autoremove“.
0 ažuriranih, 0 novoinstaliranih, 0 za uklanjanje i 1 koji neće biti ažurirani.
Komanda:
sudo sensors-detect
Ovo:
sensors-detect revision 5984 (2011-07-10 21:22:53 +0200)
System: Gigabyte Technology Co., Ltd. P31-DS3L
This program will help you determine which kernel modules you needto load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you’re doing.
Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no):
Module cpuid loaded successfully.
Silicon Integrated Systems SIS5595… No
VIA VT82C686 Integrated Sensors… No
VIA VT8231 Integrated Sensors… No
AMD K8 thermal sensors… No
AMD Family 10h thermal sensors… No
AMD Family 11h thermal sensors… No
AMD Family 12h and 14h thermal sensors… No
AMD Family 15h thermal sensors… No
AMD Family 15h power sensors… No
Intel digital thermal sensor… Success!
(driver `coretemp’)
Intel AMB FB-DIMM thermal sensor… No
VIA C7 thermal sensor… No
VIA Nano thermal sensor… No
Some Super I/O chips contain embedded sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no):
Probing for Super-I/O at 0x2e/0x2f
Trying family
National Semiconductor/ITE'... No Trying family SMSC’… NoTrying family
VIA/Winbond/Nuvoton/Fintek'... No Trying family ITE’… YesFound
ITE IT8718F Super IO Sensors' Success! (address 0x290, driver it87’)Probing for Super-I/O at 0x4e/0x4f
Trying family
National Semiconductor/ITE'... No Trying family SMSC’… NoTrying family
VIA/Winbond/Nuvoton/Fintek'... No Trying family ITE’… NoSome systems (mainly servers) implement IPMI, a set of common interfaces
through which system health data may be retrieved, amongst other things.
We first try to get the information from SMBIOS. If we don’t find it
there, we have to read from arbitrary I/O ports to probe for such
interfaces. This is normally safe. Do you want to scan for IPMI
interfaces? (YES/no):
Probing for
IPMI BMC KCS' at 0xca0... No Probing for IPMI BMC SMIC’ at 0xca8… NoSome hardware monitoring chips are accessible through the ISA I/O ports.
We have to write to arbitrary I/O ports to probe them. This is usually
safe though. Yes, you do have ISA I/O ports even if you do not have any
ISA slots! Do you want to scan the ISA I/O ports? (yes/NO):
Lastly, we can probe the I2C/SMBus adapters for connected hardware
monitoring devices. This is the most risky part, and while it works
reasonably well on most systems, it has been reported to cause trouble
on some systems.
Do you want to probe the I2C/SMBus adapters now? (YES/no):
Using driver `i2c-i801’ for device 0000:00:1f.3: Intel 82801G ICH7
Module i2c-i801 loaded successfully.
Module i2c-dev loaded successfully.
Next adapter: SMBus I801 adapter at 0500 (i2c-0)
Do you want to scan it? (yes/NO/selectively):
Now follows a summary of the probes I have just done.
Just press ENTER to continue:
Driver `it87’:
- ISA bus, address 0x290
Chip `ITE IT8718F Super IO Sensors’ (confidence: 9)
- Chip `Intel digital thermal sensor’ (confidence: 9)
#----cut here----
Chip drivers
coretempit87
#----cut here----
If you have some drivers built into your kernel, the list above will
contain too many modules. Skip the appropriate ones!
Do you want to add these lines automatically to /etc/modules? (yes/NO)
Unloading i2c-dev… OK
Unloading i2c-i801… OK
Unloading cpuid… OK
KOMANDA:
sensors
OVO:
No sensors found!
Make sure you loaded all the kernel drivers you need.
Try sensors-detect to find out which these are.
Zanima me vaše mišljenje gdje sam i ako sam pogriješio ili šta još treba uraditi
Hvala
Last edited: