@Ćofi Kada ukucam “dmesg” dobijem sledeći ispis…
[ 0.111620] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.111714] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.111811] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.112237] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.112246] vgaarb: loaded
[ 0.112248] vgaarb: bridge control possible 0000:00:02.0
[ 0.112676] SCSI subsystem initialized
[ 0.112769] libata version 3.00 loaded.
[ 0.112825] ACPI: bus type USB registered
[ 0.112867] usbcore: registered new interface driver usbfs
[ 0.112888] usbcore: registered new interface driver hub
[ 0.112936] usbcore: registered new device driver usb
[ 0.113171] PCI: Using ACPI for IRQ routing
[ 0.115067] PCI: pci_cache_line_size set to 64 bytes
[ 0.115119] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[ 0.115123] e820: reserve RAM buffer [mem 0x3f7f0000-0x3fffffff]
[ 0.115338] NetLabel: Initializing
[ 0.115343] NetLabel: domain hash size = 128
[ 0.115344] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.115363] NetLabel: unlabeled traffic allowed by default
[ 0.115508] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.115516] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.115522] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.117137] Switched to clocksource hpet
[ 0.127551] AppArmor: AppArmor Filesystem Enabled
[ 0.127631] pnp: PnP ACPI init
[ 0.127666] ACPI: bus type PNP registered
[ 0.127920] system 00:00: [io 0x04d0-0x04d1] has been reserved
[ 0.127925] system 00:00: [io 0x0290-0x029f] has been reserved
[ 0.127928] system 00:00: [io 0x0800-0x087f] has been reserved
[ 0.127932] system 00:00: [io 0x0290-0x0294] has been reserved
[ 0.127935] system 00:00: [io 0x0880-0x088f] has been reserved
[ 0.127941] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.128052] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.128474] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.128791] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.129098] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.129274] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.129346] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.129455] system 00:07: [io 0x0400-0x04bf] could not be reserved
[ 0.129461] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.129791] system 00:08: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.129797] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.130052] system 00:09: [mem 0x000cc000-0x000d3fff] has been reserved
[ 0.130057] system 00:09: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.130060] system 00:09: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.130064] system 00:09: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.130067] system 00:09: [mem 0x3f7f0000-0x3f7fffff] could not be reserved
[ 0.130071] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.130074] system 00:09: [mem 0x00100000-0x3f7effff] could not be reserved
[ 0.130077] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.130081] system 00:09: [mem 0xfed13000-0xfed1dfff] has been reserved
[ 0.130084] system 00:09: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.130087] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.130090] system 00:09: [mem 0xffb00000-0xffb7ffff] has been reserved
[ 0.130094] system 00:09: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.130097] system 00:09: [mem 0x000e0000-0x000effff] has been reserved
[ 0.130101] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.130111] pnp: PnP ACPI: found 10 devices
[ 0.130113] ACPI: bus type PNP unregistered
[ 0.137812] pci 0000:00:1f.0: BAR 13: [io 0x0400-0x047f] has bogus alignment
[ 0.137822] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.137827] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff]
[ 0.137844] pci 0000:02:05.0: BAR 6: assigned [mem 0xe0000000-0xe001ffff pref]
[ 0.137849] pci 0000:00:1e.0: PCI bridge to [bus 02]
[ 0.137853] pci 0000:00:1e.0: bridge window [io 0xa000-0xafff]
[ 0.137859] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xe1ffffff]
[ 0.137870] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.137873] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.137877] pci_bus 0000:01: resource 0 [io 0x9000-0x9fff]
[ 0.137880] pci_bus 0000:02: resource 0 [io 0xa000-0xafff]
[ 0.137883] pci_bus 0000:02: resource 1 [mem 0xe0000000-0xe1ffffff]
[ 0.137886] pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
[ 0.137889] pci_bus 0000:02: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.137942] NET: Registered protocol family 2
[ 0.138282] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.138326] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
[ 0.138385] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.138466] TCP: reno registered
[ 0.138474] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.138489] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.138617] NET: Registered protocol family 1
[ 0.138657] pci 0000:00:02.0: Boot video device
[ 0.139555] PCI: CLS 32 bytes, default 64
[ 0.139704] Trying to unpack rootfs image as initramfs…
[ 0.671593] Freeing initrd memory: 19928K (ffff880035904000 - ffff880036c7a000)
[ 0.671938] microcode: CPU0 sig=0xf65, pf=0x4, revision=0x9
[ 0.672074] microcode: Microcode Update Driver: v2.00 , Peter Oruba
[ 0.672118] Scanning for low memory corruption every 60 seconds
[ 0.672591] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.672619] Initialise system trusted keyring
[ 0.672662] audit: initializing netlink subsys (disabled)
[ 0.672696] audit: type=2000 audit(1415215549.672:1): initialized
[ 0.673195] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.676139] zpool: loaded
[ 0.676146] zbud: loaded
[ 0.676424] VFS: Disk quotas dquot_6.5.2
[ 0.676504] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.677402] fuse init (API version 7.23)
[ 0.677577] msgmni has been set to 1966
[ 0.677693] Key type big_key registered
[ 0.678174] Key type asymmetric registered
[ 0.678181] Asymmetric key parser ‘x509’ registered
[ 0.678273] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.678356] io scheduler noop registered
[ 0.678362] io scheduler deadline registered (default)
[ 0.678456] io scheduler cfq registered
[ 0.678776] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.678913] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.678943] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.679032] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[ 0.679035] vesafb: scrolling: redraw
[ 0.679038] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.679070] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90004280000, using 5120k, total 5120k
[ 0.679255] Console: switching to colour frame buffer device 160x64
[ 0.679284] fb0: VESA VGA frame buffer device
[ 0.679454] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.679461] ACPI: Power Button [PWRB]
[ 0.679545] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.679550] ACPI: Power Button [PWRF]
[ 0.679803] GHES: HEST is not enabled!
[ 0.680066] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.700500] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.721023] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 0.723477] Linux agpgart interface v0.103
[ 0.723557] agpgart-intel 0000:00:00.0: Intel 945G Chipset
[ 0.723588] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[ 0.723692] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 0.723843] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 0.726171] brd: module loaded
[ 0.727371] loop: module loaded
[ 0.727663] ata_piix 0000:00:1f.2: version 2.13
[ 0.727806] ata_piix 0000:00:1f.2: MAP [ IDE IDE P1 P3 ]
[ 0.729016] scsi0 : ata_piix
[ 0.729229] scsi1 : ata_piix
[ 0.729309] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 0.729313] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 0.729483] libphy: Fixed MDIO Bus: probed
[ 0.729488] tun: Universal TUN/TAP device driver, 1.6
[ 0.729490] tun: © 1999-2004 Max Krasnyansky
[ 0.729773] PPP generic driver version 2.4.2
[ 0.729858] ehci_hcd: USB 2.0 ‘Enhanced’ Host Controller (EHCI) Driver
[ 0.729869] ehci-pci: EHCI PCI platform driver
[ 0.730057] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.730070] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.734008] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 0.734054] ehci-pci 0000:00:1d.7: irq 23, io mem 0xe20c4000
[ 0.744025] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.744139] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.744144] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.744147] usb usb1: Product: EHCI Host Controller
[ 0.744149] usb usb1: Manufacturer: Linux 3.16.0-24-generic ehci_hcd
[ 0.744152] usb usb1: SerialNumber: 0000:00:1d.7
[ 0.744381] hub 1-0:1.0: USB hub found
[ 0.744395] hub 1-0:1.0: 8 ports detected
[ 0.744743] ehci-platform: EHCI generic platform driver
[ 0.744770] ohci_hcd: USB 1.1 ‘Open’ Host Controller (OHCI) Driver
[ 0.744782] ohci-pci: OHCI PCI platform driver
[ 0.744809] ohci-platform: OHCI generic platform driver
[ 0.744829] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.745005] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.745016] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.745026] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 0.745053] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b000
[ 0.745159] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.745163] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.745167] usb usb2: Product: UHCI Host Controller
[ 0.745171] usb usb2: Manufacturer: Linux 3.16.0-24-generic uhci_hcd
[ 0.745173] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.745385] hub 2-0:1.0: USB hub found
[ 0.745398] hub 2-0:1.0: 2 ports detected
[ 0.745705] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.745716] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.745726] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 0.745768] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[ 0.745861] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.745865] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.745869] usb usb3: Product: UHCI Host Controller
[ 0.745872] usb usb3: Manufacturer: Linux 3.16.0-24-generic uhci_hcd
[ 0.745874] usb usb3: SerialNumber: 0000:00:1d.1
[ 0.746068] hub 3-0:1.0: USB hub found
[ 0.746080] hub 3-0:1.0: 2 ports detected
[ 0.746356] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.746370] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.746379] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 0.746417] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b800
[ 0.746510] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.746515] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.746517] usb usb4: Product: UHCI Host Controller
[ 0.746520] usb usb4: Manufacturer: Linux 3.16.0-24-generic uhci_hcd
[ 0.746522] usb usb4: SerialNumber: 0000:00:1d.2
[ 0.746718] hub 4-0:1.0: USB hub found
[ 0.746730] hub 4-0:1.0: 2 ports detected
[ 0.747035] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.747046] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.747054] uhci_hcd 0000:00:1d.3: detected 2 ports
[ 0.747093] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000bc00
[ 0.747195] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.747199] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.747202] usb usb5: Product: UHCI Host Controller
[ 0.747205] usb usb5: Manufacturer: Linux 3.16.0-24-generic uhci_hcd
[ 0.747207] usb usb5: SerialNumber: 0000:00:1d.3
[ 0.747400] hub 5-0:1.0: USB hub found
[ 0.747413] hub 5-0:1.0: 2 ports detected
[ 0.747714] i8042: PNP: PS/2 Controller [PNP0303
S2K,PNP0f13
S2M] at 0x60,0x64 irq 1,12
[ 0.748189] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.748199] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.748432] mousedev: PS/2 mouse device common for all mice
[ 0.748679] rtc_cmos 00:01: RTC can wake from S4
[ 0.748849] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.748886] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.749036] device-mapper: uevent: version 1.0.3
[ 0.749175] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised:
[email protected]
[ 0.749211] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.749373] TCP: cubic registered
[ 0.749596] NET: Registered protocol family 10
[ 0.749950] NET: Registered protocol family 17
[ 0.749977] Key type dns_resolver registered
[ 0.750389] Loading compiled-in X.509 certificates
[ 0.751974] Loaded X.509 cert ‘Magrathea: Glacier signing key: 3c8840d17bdf902e171e23b4bbc2728eb694c70a’
[ 0.752057] registered taskstats version 1
[ 0.755942] Key type trusted registered
[ 0.759572] Key type encrypted registered
[ 0.763261] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.763271] ima: No TPM chip found, activating TPM-bypass!
[ 0.763305] evm: HMAC attrs: 0x1
[ 0.763644] Magic number: 6:795:444
[ 0.763775] rtc_cmos 00:01: setting system clock to 2014-11-05 19:25:50 UTC (1415215550)
[ 0.763895] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.763898] EDD information not available.
[ 0.763995] PM: Hibernation image not present or could not be loaded.
[ 0.770626] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 0.892347] ata1.00: ATAPI: Optiarc DVD RW AD-5170A, 1.14, max UDMA/66
[ 0.908215] ata1.00: configured for UDMA/66
[ 0.909353] scsi 0:0:0:0: CD-ROM Optiarc DVD RW AD-5170A 1.14 PQ: 0 ANSI: 5
[ 0.916954] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 0.916959] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 0.917167] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 0.917275] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 0.936218] ata2.00: HPA detected: current 312315562, native 312581808
[ 0.936227] ata2.00: ATA-7: WDC WD1600AAJS-22PSA0, 05.06H05, max UDMA/133
[ 0.936230] ata2.00: 312315562 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.952912] ata2.00: configured for UDMA/133
[ 0.953029] scsi 1:0:0:0: Direct-Access ATA WDC WD1600AAJS-2 6H05 PQ: 0 ANSI: 5
[ 0.953369] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 0.953485] sd 1:0:0:0: [sda] 312315562 512-byte logical blocks: (159 GB/148 GiB)
[ 0.953565] sd 1:0:0:0: [sda] Write Protect is off
[ 0.953570] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.953603] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
[ 1.038711] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 >
[ 1.039490] sd 1:0:0:0: [sda] Attached SCSI disk
[ 1.041614] Freeing unused kernel memory: 1360K (ffffffff81d2e000 - ffffffff81e82000)
[ 1.041620] Write protecting the kernel read-only data: 12288k
[ 1.043774] Freeing unused kernel memory: 448K (ffff880001790000 - ffff880001800000)
[ 1.045862] Freeing unused kernel memory: 488K (ffff880001b86000 - ffff880001c00000)
[ 1.072357] systemd-udevd[100]: starting version 208
[ 1.073367] random: systemd-udevd urandom read with 16 bits of entropy available
[ 1.112139] usb 1-7: new high-speed USB device number 3 using ehci-pci
[ 1.163636] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.163815] r8169 0000:02:05.0 (unregistered net_device): not PCI Express
[ 1.170845] r8169 0000:02:05.0 eth0: RTL8169sc/8110sc at 0xffffc900001ec000, 00:1d:7d:32:ec:94, XID 18000000 IRQ 21
[ 1.170853] r8169 0000:02:05.0 eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok]
[ 1.252033] usb 1-7: New USB device found, idVendor=1871, idProduct=0d01
[ 1.252041] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.252045] usb 1-7: Product: USB2.0 Camera
[ 1.252048] usb 1-7: Manufacturer: AVEO Technology Corp.
[ 1.492036] usb 4-2: new low-speed USB device number 2 using uhci_hcd
[ 1.619362] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[ 1.668026] tsc: Refined TSC clocksource calibration: 3081.477 MHz
[ 1.704512] usb 4-2: New USB device found, idVendor=1a2c, idProduct=0021
[ 1.704517] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.704521] usb 4-2: Product: USB Keykoard
[ 1.704523] usb 4-2: Manufacturer: USB
[ 1.713657] hidraw: raw HID events driver © Jiri Kosina
[ 1.742924] usbcore: registered new interface driver usbhid
[ 1.742930] usbhid: USB HID core driver
[ 1.746904] input: USB USB Keykoard as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/0003:1A2C:0021.0001/input/input5
[ 1.747207] hid-generic 0003:1A2C:0021.0001: input,hidraw0: USB HID v1.10 Keyboard [USB USB Keykoard] on usb-0000:00:1d.2-2/input0
[ 2.417304] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
[ 2.668086] Switched to clocksource tsc
[ 2.690167] random: nonblocking pool is initialized
[ 2.719193] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[ 4.168037] floppy0: no floppy controllers found
[ 4.168056] work still pending
[ 11.745506] hid-generic 0003:1A2C:0021.0002: usb_submit_urb(ctrl) failed: -1
[ 11.745527] hid-generic 0003:1A2C:0021.0002: timeout initializing reports
[ 11.745682] input: USB USB Keykoard as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.1/0003:1A2C:0021.0002/input/input6
[ 11.745844] hid-generic 0003:1A2C:0021.0002: input,hidraw1: USB HID v1.10 Device [USB USB Keykoard] on usb-0000:00:1d.2-2/input1
[ 13.343963] init: plymouth-upstart-bridge main process (150) terminated with status 1
[ 13.343989] init: plymouth-upstart-bridge main process ended, respawning
[ 13.347863] init: plymouth-upstart-bridge main process (166) terminated with status 1
[ 13.347888] init: plymouth-upstart-bridge main process ended, respawning
[ 13.353560] init: plymouth-upstart-bridge main process (168) terminated with status 1
[ 13.353584] init: plymouth-upstart-bridge main process ended, respawning
[ 13.361676] init: plymouth-upstart-bridge main process (169) terminated with status 1
[ 13.361701] init: plymouth-upstart-bridge main process ended, respawning
[ 13.367683] init: plymouth-upstart-bridge main process (171) terminated with status 1
[ 13.367708] init: plymouth-upstart-bridge main process ended, respawning
[ 13.375787] init: plymouth-upstart-bridge main process (172) terminated with status 1
[ 13.375812] init: plymouth-upstart-bridge main process ended, respawning
[ 13.385469] init: plymouth-upstart-bridge main process (174) terminated with status 1
[ 13.385494] init: plymouth-upstart-bridge main process ended, respawning
[ 13.393609] init: plymouth-upstart-bridge main process (176) terminated with status 1
[ 13.393636] init: plymouth-upstart-bridge main process ended, respawning
[ 21.117905] Adding 1951740k swap on /dev/sda6. Priority:-1 extents:1 across:1951740k FS
[ 21.709600] systemd-udevd[289]: starting version 208
[ 21.950017] lp: driver loaded but no devices found
[ 21.961973] ppdev: user-space parallel port driver
[ 21.970644] parport_pc 00:04: reported by Plug and Play ACPI
[ 21.970701] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 22.102764] lp0: using parport0 (interrupt-driven).
[ 22.137101] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 22.142655] [drm] Initialized drm 1.1.0 20060810
[ 22.173043] EXT4-fs (sda8): re-mounted. Opts: errors=remount-ro
[ 22.561379] intel_rng: FWH not detected
[ 22.609594] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x000000000000042c-0x000000000000042d (\GP2C) (20140424/utaddress-258)
[ 22.609605] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 22.612337] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 22.651711] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
[ 22.666901] leds_ss4200: no LED devices found
[ 22.708546] [drm] Memory usable by graphics device = 256M
[ 22.708552] [drm] Replacing VGA console driver
[ 22.708558] checking generic (d0000000 500000) vs hw (d0000000 10000000)
[ 22.708561] fb: switching to inteldrmfb from VESA VGA
[ 22.708611] Console: switching to colour dummy device 80x25
[ 22.726048] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 22.726054] [drm] Driver supports precise vblank timestamp query.
[ 22.726137] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem
wns=io+mem
[ 22.770833] [drm] initialized overlay support
[ 22.887457] fbcon: inteldrmfb (fb0) is primary device
[ 22.887511] Console: switching to colour frame buffer device 160x64
[ 22.887548] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 22.887551] i915 0000:00:02.0: registered panic notifier
[ 22.887570] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 23.067975] snd_hda_intel 0000:00:1b.0: irq 41 for MSI/MSI-X
[ 23.108846] sound hdaudioC0D2: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 23.108853] sound hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 23.108857] sound hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 23.108860] sound hdaudioC0D2: mono: mono_out=0x0
[ 23.108863] sound hdaudioC0D2: dig-out=0x1e/0x0
[ 23.108865] sound hdaudioC0D2: inputs:
[ 23.108869] sound hdaudioC0D2: Rear Mic=0x18
[ 23.108873] sound hdaudioC0D2: Front Mic=0x19
[ 23.108876] sound hdaudioC0D2: Line=0x1a
[ 23.108878] sound hdaudioC0D2: CD=0x1c
[ 23.108881] sound hdaudioC0D2: dig-in=0x1f
[ 23.144673] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 23.144899] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 23.145143] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 23.146755] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 23.147001] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 23.147215] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 23.147420] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 23.252290] media: Linux media interface: v0.10
[ 23.284456] Linux video capture interface: v2.00
[ 23.312624] uvcvideo: Found UVC 1.00 device USB2.0 Camera (1871:0d01)
[ 23.314068] input: USB2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7:1.0/input/input14
[ 23.314293] usbcore: registered new interface driver uvcvideo
[ 23.314298] USB Video Class driver (1.1.1)
[ 23.532914] audit: type=1400 audit(1415211973.267:2): apparmor=“STATUS” operation=“profile_load” profile=“unconfined” name="/sbin/dhclient" pid=377 comm=“apparmor_parser”
[ 23.532929] audit: type=1400 audit(1415211973.267:3): apparmor=“STATUS” operation=“profile_load” profile=“unconfined” name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=377 comm=“apparmor_parser”
[ 23.532937] audit: type=1400 audit(1415211973.267:4): apparmor=“STATUS” operation=“profile_load” profile=“unconfined” name="/usr/lib/connman/scripts/dhclient-script" pid=377 comm=“apparmor_parser”
[ 23.538043] audit: type=1400 audit(1415211973.271:5): apparmor=“STATUS” operation=“profile_load” profile=“unconfined” name="/usr/sbin/ntpd" pid=407 comm=“apparmor_parser”
[ 24.523006] gpio_ich: GPIO from 206 to 255 on gpio_ich
[ 25.304109] floppy0: no floppy controllers found
[ 25.304129] work still pending
[ 25.854469] init: failsafe main process (532) killed by TERM signal
[ 26.747243] audit: type=1400 audit(1415211976.479:6): apparmor=“STATUS” operation=“profile_load” profile=“unconfined” name="/usr/lib/cups/backend/cups-pdf" pid=678 comm=“apparmor_parser”
[ 26.747258] audit: type=1400 audit(1415211976.479:7): apparmor=“STATUS” operation=“profile_load” profile=“unconfined” name="/usr/sbin/cupsd" pid=678 comm=“apparmor_parser”
[ 26.747265] audit: type=1400 audit(1415211976.479:8): apparmor=“STATUS” operation=“profile_load” profile=“unconfined” name=“third_party” pid=678 comm=“apparmor_parser”
[ 27.119675] Bluetooth: Core ver 2.19
[ 27.119817] NET: Registered protocol family 31
[ 27.119821] Bluetooth: HCI device and connection manager initialized
[ 27.122095] Bluetooth: HCI socket layer initialized
[ 27.122105] Bluetooth: L2CAP socket layer initialized
[ 27.122134] Bluetooth: SCO socket layer initialized
[ 27.131264] Bluetooth: RFCOMM TTY layer initialized
[ 27.131286] Bluetooth: RFCOMM socket layer initialized
[ 27.131303] Bluetooth: RFCOMM ver 1.11
[ 27.251797] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 27.251804] Bluetooth: BNEP filters: protocol multicast
[ 27.251824] Bluetooth: BNEP socket layer initialized
[ 27.826175] init: cups main process (679) killed by HUP signal
[ 27.826201] init: cups main process ended, respawning
[ 27.935408] audit: type=1400 audit(1415211977.667:9): apparmor=“STATUS” operation=“profile_load” profile=“unconfined” name="/usr/lib/lightdm/lightdm-guest-session" pid=746 comm=“apparmor_parser”
[ 27.935426] audit: type=1400 audit(1415211977.667:10): apparmor=“STATUS” operation=“profile_load” profile=“unconfined” name=“chromium” pid=746 comm=“apparmor_parser”
[ 27.939161] audit: type=1400 audit(1415211977.671:11): apparmor=“STATUS” operation=“profile_replace” profile=“unconfined” name="/sbin/dhclient" pid=746 comm=“apparmor_parser”
[ 30.270783] systemd-logind[840]: New seat seat0.
[ 30.300913] systemd-logind[840]: Watching system buttons on /dev/input/event1 (Power Button)
[ 30.301060] systemd-logind[840]: Watching system buttons on /dev/input/event0 (Power Button)
[ 30.460779] r8169 0000:02:05.0 eth0: link down
[ 30.460795] r8169 0000:02:05.0 eth0: link down
[ 30.460901] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 32.615742] audit_printk_skb: 24 callbacks suppressed
[ 32.615749] audit: type=1400 audit(1415211982.347:20): apparmor=“STATUS” operation=“profile_replace” profile=“unconfined” name="/usr/sbin/cups-browsed" pid=1163 comm=“apparmor_parser”
[ 33.046450] r8169 0000:02:05.0 eth0: link up
[ 33.046467] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 34.511370] init: plymouth-upstart-bridge main process ended, respawning
[ 34.540224] init: plymouth-upstart-bridge main process (1510) terminated with status 1
[ 34.540252] init: plymouth-upstart-bridge main process ended, respawning
[ 34.760456] systemd-logind[840]: Failed to start unit
[email protected]: Unknown unit:
[email protected]
[ 34.760471] systemd-logind[840]: Failed to start user service: Unknown unit:
[email protected]
[ 34.771798] systemd-logind[840]: New session c1 of user toske.
[ 34.771854] systemd-logind[840]: Linked /tmp/.X11-unix/X0 to /run/user/1000/X11-display.
[ 57.157883] audit: type=1400 audit(1415212006.889:21): apparmor=“STATUS” operation=“profile_replace” profile=“unconfined” name="/usr/lib/cups/backend/cups-pdf" pid=2395 comm=“apparmor_parser”
[ 57.157906] audit: type=1400 audit(1415212006.889:22): apparmor=“STATUS” operation=“profile_replace” profile=“unconfined” name="/usr/sbin/cupsd" pid=2395 comm=“apparmor_parser”
[ 57.157919] audit: type=1400 audit(1415212006.889:23): apparmor=“STATUS” operation=“profile_replace” profile=“unconfined” name=“third_party” pid=2395 comm=“apparmor_parser”
toske@toske-945GZM-S2:~$
