mucak opet ista prica i nista sad ne pomaze:
[/URL] [/url]">http://
View attachment 884
[/url]">http://
View attachment 885
[/url]">http://
View attachment 886
i odakle ovaj phonon kde control module kad ja koristim lxde i ja taj phonon nisam instalirao niti mogu da ga nadjem bilo gde medju aplikacijama jedino da se sam instalirao sa krusaderom???
i da ovo je ponovo pocelo da se desava nakon sto sam namestio da se automatski logujem ako to ima veze
moj /etc/modprobe.d/alsa-base.conf
autoloader aliases
install sound-slot-0 /sbin/modprobe snd-card-0
install sound-slot-1 /sbin/modprobe snd-card-1
install sound-slot-2 /sbin/modprobe snd-card-2
install sound-slot-3 /sbin/modprobe snd-card-3
install sound-slot-4 /sbin/modprobe snd-card-4
install sound-slot-5 /sbin/modprobe snd-card-5
install sound-slot-6 /sbin/modprobe snd-card-6
install sound-slot-7 /sbin/modprobe snd-card-7
Cause optional modules to be loaded above generic modules
install snd /sbin/modprobe --ignore-install snd && { /sbin/modprobe --quiet snd-ioctl32 ; /sbin/modprobe --quiet snd-seq ; : ; }
install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi && { /sbin/modprobe --quiet snd-seq-midi ; : ; }
install snd-emu10k1 /sbin/modprobe --ignore-install snd-emu10k1 && { /sbin/modprobe --quiet snd-emu10k1-synth ; : ; }
Keep snd-pcsp from beeing loaded as first soundcard
options snd-pcsp index=-2
Keep snd-usb-audio from beeing loaded as first soundcard
options snd-usb-audio index=-2
Prevent abnormal drivers from grabbing index 0
options bt87x index=-2
options cx88_alsa index=-2
options snd-atiixp-modem index=-2
options snd-intel8x0m index=-2
options snd-via82xx-modem index=-2
ovde kazu [URL]https://wiki.archlinux.org/index.php/Advanced_Linux_Sound_Architecture tacnije:
Set the default sound card
If your sound card order changes on boot, you can specify their order in any file ending with .conf in /etc/modprobe.d (/etc/modprobe.d/alsa-base.conf is suggested). For example, if you want your mia sound card to be #0:
/etc/modprobe.d/alsa-base.conf
options snd slots=snd_mia,snd_hda_intel
options snd_mia index=0
options snd_hda_intel index=1
Use $ cat /proc/asound/modules to get the loaded sound modules and their order. This list is usually all that is needed for the loading order. Use $ lsmod | grep snd to get a devices & modules list. This configuration assumes you have one mia sound card using snd_mia and one (e.g. onboard) card using snd_hda_intel.
You can also provide an index of -2 to instruct ALSA to never use a card as the primary one. Distributions such as Linux Mint and Ubuntu use the following settings to avoid USB and other “abnormal” drivers from getting index 0:
/etc/modprobe.d/alsa-base.conf
options bt87x index=-2
options cx88_alsa index=-2
options saa7134-alsa index=-2
options snd-atiixp-modem index=-2
options snd-intel8x0m index=-2
options snd-via82xx-modem index=-2
options snd-usb-audio index=-2
options snd-usb-caiaq index=-2
options snd-usb-ua101 index=-2
options snd-usb-us122l index=-2
options snd-usb-usx2y index=-2
options snd-pcsp index=-2
options snd-usb-audio index=-2
These changes require a system reboot.
Select the default PCM via environment variable
In your configuration file, preferably global, add:
pcm.!default {
type plug
slave.pcm {
@func getenv
vars [ ALSAPCM ]
default “hw:Audigy2”
}
}
You need to replace the default line with the name of your card (in the example is Audigy2). You can get the names with aplay -l or you can also use PCMs like surround51. But if you need to use the microphone it is a good idea to select full-duplex PCM as default.
Now you can start programs selecting the sound card just changing the environment variable ALSAPCM. It works fine for all program that do not allow to select the card, for the others ensure you keep the default card. For example, assuming you wrote a downmix PCM called mix51to20 you can use it with mplayer using the commandline ALSAPCM=mix51to20 mplayer example_6_channel.wav
e sad jel moze mala pomoc kako bi to izgledalo u mom slucaju tj kako ja to da modifikujem u tom mom fajlu konkretno za tu mrtvu yamahu?
ispis iz terminala:
shooms@woodoo:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: YMF724F [Yamaha DS-1 (YMF724F)], device 0: YMFPCI [YMFPCI]
Subdevices: 32/32
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
Subdevice #2: subdevice #2
Subdevice #3: subdevice #3
Subdevice #4: subdevice #4
Subdevice #5: subdevice #5
Subdevice #6: subdevice #6
Subdevice #7: subdevice #7
Subdevice #8: subdevice #8
Subdevice #9: subdevice #9
Subdevice #10: subdevice #10
Subdevice #11: subdevice #11
Subdevice #12: subdevice #12
Subdevice #13: subdevice #13
Subdevice #14: subdevice #14
Subdevice #15: subdevice #15
Subdevice #16: subdevice #16
Subdevice #17: subdevice #17
Subdevice #18: subdevice #18
Subdevice #19: subdevice #19
Subdevice #20: subdevice #20
Subdevice #21: subdevice #21
Subdevice #22: subdevice #22
Subdevice #23: subdevice #23
Subdevice #24: subdevice #24
Subdevice #25: subdevice #25
Subdevice #26: subdevice #26
Subdevice #27: subdevice #27
Subdevice #28: subdevice #28
Subdevice #29: subdevice #29
Subdevice #30: subdevice #30
Subdevice #31: subdevice #31
card 0: YMF724F [Yamaha DS-1 (YMF724F)], device 1: YMFPCI - IEC958 [YMFPCI - IEC958]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: YMF724F [Yamaha DS-1 (YMF724F)], device 2: YMFPCI - Rear [YMFPCI - Rear PCM]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: Intel [HDA Intel], device 0: ALC888 Analog [ALC888 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: Intel [HDA Intel], device 1: ALC888 Digital [ALC888 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
shooms@woodoo:~$ cat /proc/asound/modules
0 snd_ymfpci
1 snd_hda_intel
2 snd_hda_intel
3 snd_usb_audio
shooms@woodoo:~$
…da li bi to trebalo da izleda ovako :
options snd slots=snd_mia,snd_ymfpci
options snd_mia index=0
options snd_ymfpci index=1
pcm.!default {
type plug
slave.pcm {
@func getenv
vars [ ALSAPCM ]
default “hw:ymfpci”
}
}
i samo jos gde tacno na kom mestu da dodam ovu(tj u kojoj sekciji fajla -pocetak kraj sredina?)